PHARMA 4.0

Global

Bioprocessing

SUMMIT & EXHIBITION

Where the world’s technology leaders, scientists and engineers from pharma, biotech and pharma
suppliers get together for commercial progress and successful large-scale bioprocessing.

APRIL, 2024

Berlin, GERMANY

PHARMA 4.0

Global

Bioprocessing

SUMMIT & EXHIBITION

Where the world’s technology leaders, scientists and engineers from pharma, biotech and pharma
suppliers get together for commercial progress and successful large-scale bioprocessing.

APRIL, 2024

Berlin, GERMANY

2023 SPEAKERS

Zorica Dragic

Unit Head Cell Line Screening and Development

NOVARTIS

Stefano Menegatti

Associate Professor

NC State University

Cecilia Unoson

Head of Applications Research, Principal Scientist

Bio-Works

Mike Burns

Senior Biomanufacturing Engineer

Merck Group

Jens Smiatek

Digitalization Development Biologicals CMC

Boehringer Ingelheim

Prof. Dr. Peter Neubauer

Professor for Bioprocess Engineering

Technische Universität Berlin

Sandy Tretbar

Group Leader

Fraunhofer-Institute for Cell Therapie and Immunology (IZI)

Priya Sahadevan Syamala, PhD

Development Scientist III

APC LTD

James Drinkwater

Head of Aseptic processing technologies & GMP Compliance F Ziel GmbH & Chairman of PHSS

Pharmaceutical & Healthcare

Manuel Moradell-Casellas

Manufacturing Process Expert DSP

Merck

CPD accreditation

Keynotion certifies that this conference has been approved for CPD credits by The CPD Standards Office. Our credits are internationally recognized. We have an internal dedicated team that works closely with our CPD provider to support your accreditation request to be accepted worldwide.

KEY TRACKS

Downstream Processing & Continuous Biomanufacturing

Industry experts will share their knowledge and we will present and discuss how to optimize technologies and process setups, manufacturing challenges, and strategies such as digitalization, modelling, automation, scaling up, single-use technology, and securing process continuity. Case studies will also be presented in this track.

  • Continuous Biomanufacturing: COGS, batch definitions and sustainability in continuous biomanufacturing.
  • mAbs bioprocessing: pre-treatment of feeds and optimizations of expression levels and purification processes.
  • Downstream purification: Removal of empty capsids from full ones for AAVs, tailor-made ligands as well as more difficult targets.
  • Go Greener: sustainable bioprocesses, single use vs multiple use materials, as well as digitalization within bioprocessing and manufacturing.
  • Modelling, digitalization and automation: Modelling and simulations as a tool to scale-up processes.

ATMP Technologies for Cell & Gene Therapies

Attend the cell and gene therapy track to learn about the future of cell and gene therapy bioprocessing. The track includes expert talks on the considerations around manufacturing ATMPs, from closed loop systems for cell therapy to decentralized sites. We also cover the technical aspects of how to optimize AAV manufacturing, tackling increased demand for viral and non-viral vectors, and developing the next generation of vectors.

Don’t miss the talks on workforce, regulatory landscape, scale up and supply chain.

  • Future of ATMP manufacturing: process development, facility design.
  • Cell and gene therapy manufacturing – what skills are needed for your workforce and how to acquire them.
  • Understanding the regulatory landscape for cell and gene therapies.
  • The latest innovations in supply chain technology for cell and gene therapies.
  • Developing AAV next generation vectors.

VIP LAB TOUR

ATTENDEES WILL EXPERIENCE FIRST HAND:

  • New trends in Bioprocess scale up and scale down
  • Command, run, explore and analyze scientific workflow
  • Systematic approach in bioprocess developmen
  • Robotic Sample Preparation work-cell
  • Development of digital models for your process
  • Automation for laboratory robots from simple to complex integrated bioprocessing Solutions
  • Method development for robotic equipment

Why ATTEND

Who Should attend

Sponsorship
opportunities

As our business partner, you can leverage our event to showcase your brand and expertise through our speaking panels, booths, and exhibition opportunities. 

Our attendees attend to seek solutions for their challenges. This is your chance to show them how your solution can add value.

2023 Sponsors & Exhibitors

Grundfos
GBB SPONSORS01
Corning-lockup-box-orange_RGB_(002)
image (9)
GBB SPONSORS03
CELL GENIX
logo-shield-scientific-large
IDT BIOLOGIKA
GreenElephant_Logo_RGB-A_2000px
IDEAGEN 2
XiltriX eFertiliy CryoProducts_ joined_Logo (002)
Purolite Transparent
ValGenesis Logo - RGB - Blue - 500px
GSK_LOS_RGB.png
Ypso-Facto
SANISURE
SHIMADZU_Excellence_in_Science_CS3
image (11)
ChemoMetec
logo-Tornado-4c
Asset 2@300x

2023 attendees

2023 Sponsors & Exhibitors

Grundfos
GBB SPONSORS01
Corning-lockup-box-orange_RGB_(002)
image (9)
GBB SPONSORS03
CELL GENIX
logo-shield-scientific-large
IDT BIOLOGIKA
GreenElephant_Logo_RGB-A_2000px
IDEAGEN 2
XiltriX eFertiliy CryoProducts_ joined_Logo (002)
Purolite Transparent
ValGenesis Logo - RGB - Blue - 500px
GSK_LOS_RGB.png
Ypso-Facto
SANISURE
SHIMADZU_Excellence_in_Science_CS3
image (11)
ChemoMetec
logo-Tornado-4c
Asset 2@300x

2023 attendees

Maritim proArte Hotel Berlin

Maritim proArte Hotel Berlin

Maritim proArte Hotel Berlin

Don’t miss out on this exclusive event!!!

Industry leaders know that they need to adapt to rapid changes and need to learn from their peers.
If you are still undecided and needs help with registration, send an email to office@key-notion.com.

Prague Office

London Office

USA Contact

© 2021 - Copyright | All rights Reserved

Brochure
request

BOOK
A STAND

Apply
To speak

Poster
Submission

Martin Dieker

Martin belongs to the folks who believe that the shop floor is the only department in a company that generates values. It is in every leader's best interest to serve operators to execute their job in the best possible way.

Being a leader in operations is not about wearing nice suits and watches. The job is to ensure that operations are defining-, executing-, and improving standards on a daily base with respect to safety, quality, performance and cost. You work for 100 operators, not the other way around.

- Design and implement holistic production systems considering cross-functional integration (TPM, IWS, PSS, CBS, etc.)
- Bring lean/OpEx theory into daily operations
- Daily standard working processes and performance monitoring
- Improve processes, organizational structures and systems in industrial organizations
- Enable people to work together closely and to become better leaders (servant leaders)

Martin Gutberlet

Martin Gutberlet is responsible for the strategic and operative tasks of Baader's digitalization division as Managing Director of Open Innovation Holding GmbH, Trace Tomorrow Management GmbH and Early Business Development GmbH. Mr. Gutberlet reports directly to Mrs. Baader.

Martin Gutberlet has more than 25 years of experience in the field of digitalization and digital transformation and was most recently Chief Digital Officer of a global, listed packaging and paper company.  Prior he served as Head Digital Projects at a global leader in machine tools.

My passion: "Digital for me is about People, Change and Technology - empowering people while using innovative technology is my passion. "

 

Industry & Titles: Food, Packaging & Paper, Farming

CxO and Senior Mgmt

 

I am used to give keynotes to senior audience.

Waldemar Hirsch

Waldemar Hirsch is responsible for 3D printing of jigs & fixtures at Audi Sport. He coordinates the 3d printing activities within the production of Audi AG. His job also includes the responsibility for the mechanical analysis in the production of Audi Sport and the innovation management for the production.

Before the time of 3d printing he worked as a developer for process, method and technology after study automotive engineering at Cologne

Johan Beukema

Johan Beukema is Partner at BCI Global, a leading independent consultancy firm with headquarters in The Netherlands and offices in Europe (London, Frankfurt), North America (Atlanta, San Francisco, LA) and Asia (Singapore, Shanghai).

BCI Global was founded in 1985 and specializes in Manufacturing footprint optimization, supply chain optimization and location & site selection. Johan, who joined BCI in 1999, holds a university degree in (International) Business Administration of the University of Groningen in The Netherlands. Over the last 22 years Johan has supported many companies in the optimization of their manufacturing footprint strategies and end-to-end supply chains as well as in the selection of the optimal locations for new manufacturing sites, distribution centers and other business functions.

Johan’s geographical experience base includes EMEA, The Americas as well as Asia-Pacific including China and India. He works a lot for industry leaders in different industries as well as for new and fast-growing companies. Companies on his track record are for example ExxonMobil, Donaldson, Roche, Medtronic, Abbott, Amgen, Nestle, Danone, Takeda, Starkey, Hilti, Cisco, Huhtamaki, Ricoh, AMS AG, Brown Forman, Edwards, Oxea, Wabtec, and many others.

Johan regularly speaks at conferences and seminars and publishes about topics related to his area of expertise.

Jesper Toubøl

Jesper is the head of one of LEGO moulding sites and qualification factories which include both advanced mass manufacturing and maturing of new emerging technologies. Jesper has furthermore delivered organizational footprint and technology strategies within Product Design and Equipment ( Manufacturing - establishing Engineering centers in LEGO manufacturing sites in Singapore, Mexico and Denmark. During his work Jesper has profound focus on how IoT can support his visions and enable the future – a true IOT-technology evangelist.

Jesper has worked for LEGO in several roles.

1) Responsibility for R&D in Packaging and Processing (Decorations and Assembly) product line.

2) Responsibilities for product development execution for LEGO DUPLO , LEGO Games , LEGO Technic , LEGO Hero Factory  - leading development teams through design, sourcing and marketing process from concept to finished product.   

3) Establishing logistics strategy, delivered turn around results in increasing differentiated services and reducing costs by e.g. outsourcing, consolidating sites and redefining logistic service offering.

Peter Thorngren

Peter Thorngren has the the ability to combine customer demands with technical possibilities and limitations to create working commercial solutions. Peter has also had personal experience in running a successful business in the management/system development area.
Peter works especially well in projects with a combination of technical, organizational, and commercial challenges. With his technical understanding and experience in larger projects, he can perform well in the areas of technology and business development.

Specialties: Peter Thorngren also has extensive professional experience in the areas of finance, marketing, automotive, government, industry, and telecom sectors.

Christophe Strauven

Christophe Strauven is an experienced business driver with entrepreneurial instincts who has worked in the cybersecurity industry for more than 16 years gaining experience in different positions.

Driven by enthusiasm, he remains fully abreast of technological trends and business challenges to help align the two. As a Business developer manager for Europe, his goals include building a business development strategy that ensures continuous innovation and business growth.

Outside of the office, Christophe enjoys travelling, gardening and wine.

Chetna Jain

Chetna Jain is a conscientious & visionary professional, with 18 years of experience in leading Research & Engineering programmes and product development.

Strategic adviser for techno-commercial viability of programmes. Lead projects for innovative, technologically advanced vehicle and safety-critical high volume automotive products. Experienced in streamlining business processes and leveraging product profitability.

She has worked with multi-cultural cross-functional teams, ranging from start-ups to century old established company. An effective communicator, adaptive and quick decision maker with strong analytical thinking. Balancing between sustainability and growth, works to expand her horizons by staying open to novel experiences.

Matt Barber

Matt Barber is the Product Manager for Shopfloor-Online MES, responsible for shaping the product strategy and ensuring the product meets the current and future needs of the market.

Matt brings years of experience as a software engineer and a project lead, where he has helped numerous manufacturers, across a range of industries, digitise their manufacturing operations with Shopfloor-Online MES.

Matt graduated from the University of Sheffield in 2011, with a first-class honours degree in Computer Science, and recently received a certification from the London School of Economics (LSE) for successfully completing MBA Essentials.

Alain Nochimowski

Alain Nochimowski is the Chief Technology Officer at Viaccess-Orca. Alain is responsible for leading VO’s innovative initiatives and on a broader scope, fostering an innovative mindset across the company.

Prior to this position, Alain led business development activities, first at Orca Interactive, and following the merger with Viaccess, at the new entity Viaccess-Orca.

Alain was responsible for leading VO’s entry strategy into new markets and ventures, and for creating a supportive industrial ecosystem for VO’s new products and technologies.  Before joining Orca Interactive in 2009, Alain held various business development and technical strategy positions successively at Orange, Viaccess, and SanDisk, in New York, Paris, and Tel Aviv.

Throughout his career, Alain initiated and successfully lead multiple innovation projects that notably resulted in dozens of issued patents and strategic sales to large content service providers. Alain graduated from Ecole des Mines de Paris.

Kari Terho

Kari is the Vice President, Global Sales with Elisa IndustrIQ, helping manufacturing companies to leverage intelligent manufacturing opportunities.

Kari has over two decades of experience in working with manufacturing and telecommunications enterprise solutions and he is passionate about helping customers drive sustainable growth by using data insights to solve their most challenging problems.

Kari holds a master’s degree in Business Administration.